IVY Innovative Product RoHS Cost-effective 32A 40A EV Charger Relay

SpecificationWeight≈70gContinuous Current40AContact Form2A/2BContact MaterialAgSnO2Max. Switching Voltage277VACInitial Contact Resistance10mΩ (at 20A)Insulation Resistance100MΩ,at 500VDC,50% RHElectrical Endurance5*105opsMechanical Endurance6*103 opsDielectric withstanding voltageAcross Open Contact4000VAC

Featured Products

IVY Innovative Product RoHS Cost-Efficiency 32A 40A EV Charger RelayIVY Innovative Product RoHS Cost-Efficiency 32A 40A EV Charger RelayIVY Innovative Product RoHS Cost-Efficiency 32A 40A EV Charger Relay
SpecificationWeight≈70g
Continuous Current40A
Contact Form2A/2B
Contact MaterialAgSnO2
Max. Switching Voltage277VAC
Initial Contact Resistance10 (at 20A)
Insulation Resistance100MΩ,at 500VDC,50% RH
Electrical Endurance5*105ops
Mechanical Endurance6*103 ops
Dielectric withstanding voltageAcross Open Contact4000VAC 1min
Coil to Contact801:3000VAC 1min
801A: 4000VAC 1min  
Pick-up & Release Time30ms. typical/10ms. typical
Environment TemperatureOperation:-40ºC~85ºC
Storage:-40ºC~125ºC
Vibration10-40Hz,DA1.27mm, 40-70Hz:5g
70-100Hz:DA0.5mm,100-500Hz:5g
Shock Resistance:20g, 11ms
Dielectric Strength500Vrms, 1 min
IVY Innovative Product RoHS Cost-Efficiency 32A 40A EV Charger RelayIVY Innovative Product RoHS Cost-Efficiency 32A 40A EV Charger RelayIVY Innovative Product RoHS Cost-Efficiency 32A 40A EV Charger RelayIVY Innovative Product RoHS Cost-Efficiency 32A 40A EV Charger RelayIVY Innovative Product RoHS Cost-Efficiency 32A 40A EV Charger RelayIVY Innovative Product RoHS Cost-Efficiency 32A 40A EV Charger Relay   Cautions of New Energy Relay:
   
1.Ordering Information
    1.1 The biggest differences between this new energy relay and traditional latching relay or power relay are:
    the wider contact distance and stronger dielectric strength of 4000Vac instead of 1500 /2000Vac.
    So the contact distance can be 3mm or normal type.
   1.2 The nominal voltage of coil are 12Vdc and 24Vdc with the low power consumption of 1.8W or 3W.
   Plz note that you should drive the circuit/coil with step-down voltage to ensure power consumption of 1W~1.5W.
   1.3 Two poles of contacts of this relay, it means it can control 2 circuits and the default status is 2A- normally open.
   Simply put,
if you buy it as ev relay then most time the relay is open and not work, some times they are closed when charging.
   1.4 For environment-friendly, you can also choose this relay with lead or without lead (RoHs compliant)
   1.5 For more extra request on this relay plz feel free to contact us.

   2.Application:
   The typical application of this 40A new energy relay is AC slow charging pile.However if you would to adopt it into new area,
   plz don't hesitate to communicate with us at any time.The technical support and before-sales service are free for you.



           

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours